Look! A Wild BLE Packet Appeared!

Note! This tutorial will only work on Hail and imix boards.

This tutorial will walk you through getting an app running that scans for BLE advertisements. Most BLE devices typically broadcast advertisements periodically (usually once a second) to allow smartphones and other devices to discover them. The advertisements typically contain the BLE device's ID and name, as well as as which services the device provides, and sometimes raw data as well.

To provide BLE connectivity, several Tock boards use the Nordic nRF51822 as a BLE co-processor. In this configuration, the nRF51822 runs all of the BLE operations and exposes a command interface over a UART bus. Luckily for us, Nordic has defined and implemented the entire interface. Better yet, they made it interoperable with their nRF51 SDK. What this means is any BLE app that would run on the nRF51822 directly can be compiled to run on a different microcontroller, and any function calls that would have interacted with the BLE hardware are instead packaged and sent to the nRF51822 co-processor. Nordic calls this tool "BLE Serialization", and Tock has a port of the serialization libraries that Tock applications can use.

So, with that introduction, lets get going.

Initialize the BLE co-processor. The first step a BLE serialization app must do is initialize the BLE stack on the co-processor. This can be done with Nordic's SDK, but to simplify things Tock supports the Simple BLE library. The goal of simple_ble.c is to wrap the details of the nRF5 SDK and the intricacies of BLE in an easy-to-use library so you can get going with creating BLE devices and not learning the entire spec.

#include <simple_ble.h>

// Intervals for advertising and connections.
// These are some basic settings for BLE devices. However, since we are
// only interesting in scanning, these are not particularly relevant.
simple_ble_config_t ble_config = {
  .platform_id       = 0x00, // used as 4th octet in device BLE address
  .device_id         = DEVICE_ID_DEFAULT,
  .adv_name          = "Tock",
  .adv_interval      = MSEC_TO_UNITS(500, UNIT_0_625_MS),
  .min_conn_interval = MSEC_TO_UNITS(1000, UNIT_1_25_MS),
  .max_conn_interval = MSEC_TO_UNITS(1250, UNIT_1_25_MS)
};

int main () {
    printf("[Tutorial] BLE Scanning\n");

    // Setup BLE.
    simple_ble_init(&ble_config);
}

Scan for advertisements. With simple_ble this is pretty straightforward.

int main () {
    printf("[Tutorial] BLE Scanning\n");

    // Setup BLE.
    simple_ble_init(&ble_config);

    // Scan for advertisements.
    simple_ble_scan_start();
}

Handle the advertisement received event. Just as the main Tock microcontroller can send commands to the nRF co-processor, the co-processor can send events back. When these occur, a variety of callbacks are generated in simple_ble and then passed to users of the library. In this case, we only care about ble_evt_adv_report() which is called on each advertisement reception.
```
// Called when each advertisement is received.
void ble_evt_adv_report (ble_evt_t* p_ble_evt) {
  ble_gap_evt_adv_report_t* adv = (ble_gap_evt_adv_report_t*) &p_ble_evt->evt.gap_evt.params.adv_report;
}
```
The ble_evt_adv_report() function is passed a pointer to a ble_evt_t struct. This is a type from the Nordic nRF51 SDK, and more information can be found in the SDK documentation.

Display a message for each advertisement. Once we have the advertisement callback, we can use printf() like normal.

#include <stdio.h>

#include <led.h>

// Called when each advertisement is received.
void ble_evt_adv_report (ble_evt_t* p_ble_evt) {
  ble_gap_evt_adv_report_t* adv = (ble_gap_evt_adv_report_t*) &p_ble_evt->evt.gap_evt.params.adv_report;

  // Print some details about the discovered advertisement.
  printf("Recv Advertisement: [%02x:%02x:%02x:%02x:%02x:%02x] RSSI: %d, Len: %d\n",
    adv->peer_addr.addr[5], adv->peer_addr.addr[4], adv->peer_addr.addr[3],
    adv->peer_addr.addr[2], adv->peer_addr.addr[1], adv->peer_addr.addr[0],
    adv->rssi, adv->dlen);

  // Also toggle the first LED.
  led_toggle(0);
}

Handle some BLE annoyances. The last step to getting a working app is to handle some annoyances using BLE serialization with the simple_ble library. Typically errors generated by the nRF51 SDK are severe and mean there is a significant bug in the code. With serialization, however, messages between the two processors can be corrupted or misframed, causing parsing errors. We can ignore these errors safely and just drop the corrupted packet.

Additionally, the simple_ble library makes it easy to set the address of a BLE device. However, this functionality only works when running on an actual nRF51822. To disable this, we override the weakly defined ble_address_set() function with an empty function.
```
void app_error_fault_handler(uint32_t error_code, uint32_t line_num, uint32_t info) { }
void ble_address_set () { }
```
Run the app and see the packets! To try this tutorial application, you can find it in the tutorials app folder.

For any new applications, ensure that the following is in the makefile so that the BLE serialization library is included.
```
 include $(TOCK_USERLAND_BASE_DIR)/libnrfserialization/Makefile.app
```

Details

This section contains a few notes about the specific versions of BLE serialization used.

Tock currently supports the S130 softdevice version 2.0.0 and SDK 11.0.0.

The Tock Book

Look! A Wild BLE Packet Appeared!

Details